15 Best 2-Cycle Chainsaws, Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You need the best 2-Cycle chainsaws to handle wood cutting tasks efficiently. We compared 15 models using only the specifications published on their listings. The VEVOR 20-Inch 62cc Gas Chainsaw leads because its 62cc engine delivers strong 3.8 HP for heavy wood cutting and large tree trimming. This guide helps you decide which displacement and bar length fit your property needs.
Quick picks
The best fit for you
- You need the strongest cutting power available NEO-TEC 58cc 20-Inch Gas Chainsaw The GTHAN 62cc model delivers 4.2 HP, the highest output in this group.
- You want the lightest chainsaw for overhead work Husqvarna 445 18-Inch 50cc Chainsaw The Husqvarna 435 weighs only 9.78 pounds with a 16-inch bar.
- You require versatility with multiple bar sizes Snoonwee 58cc 2-Cycle Chainsaw with 18 and 20-Inch Bars The Snoonwee 58cc comes with both 18-inch and 20-inch bars included.
Our 15 picks
VEVOR 20-Inch 62cc Gas Chainsaw
Best for: heavy wood cutting and large tree trimming
- Engine Cycle
- 2-Cycle (what this guide is about)
- Bar Length
- 20 in
- Power Source
- Gas Powered
- Engine Displacement
- 62cc
- Motor Type
- 2 Stroke
- Recommended Use
- Tree Trimming, Wood Cutting
This 2-cycle chainsaw combines a 62cc engine producing 3.8 HP with a 20-inch guide bar. Running up to 12,000 rpm, it cuts log diameters up to 18 inches. It features a 550 ml fuel tank, a 260 ml oil tank, and a composite body built for extreme temperatures. It suits you if you need a high-displacement saw for heavy wood cutting and tree trimming without dropping to a shorter bar.
Pros
- 62cc 2-stroke engine delivers 3.8 HP at up to 12,000 rpm
- 20-inch guide bar handles cuts up to 18 inches in diameter
- 550 ml fuel tank and 260 ml oil tank support extended runtime
- Emergency stop lever halts operation immediately
Cons
- Total weight is 16.1 pounds before adding fuel and oil
- Requires manual fuel mixing at a 40:1 ratio
Good fit if
- You need to cut large branches and logs up to 18 inches in diameter
- You want a high-output 3.8 HP engine with a full 20-inch bar
- You work in hot or cold outdoor conditions requiring a durable composite body
Skip if
- You prefer a lightweight saw under 15 pounds for high-reach work
- You need a compact 12-inch or 14-inch bar for light garden maintenance
Verdict: VEVOR 20-Inch 62cc Gas Chainsaw delivers strong 3.8 HP cutting power and an 18-inch maximum cut capacity, making it a reliable workhorse for larger logs and general property cleanup.
Husqvarna 120 Mark III 16-Inch Gas Chainsaw
Best for: Homeowners tackling routine pruning and wood cutting
- Engine Cycle
- 2-Cycle (what this guide is about)
- Bar Length
- 16"
- Power Source
- Gas Powered
- Engine Displacement
- 38cc
- Motor Type
- 2-Cycle
- Features
- Automatic Oiler
The Husqvarna 120 Mark III is a gas-powered 2-cycle chainsaw equipped with a 38-cc, 1.8-HP X-Torq engine and a 16-inch guide bar. It features an automatic oiler, LowVib vibration dampening, and an inertia-activated chain brake for kickback protection. At 16.6 pounds, it suits you if you need a manageable saw designed for routine yard maintenance, light wood cutting, and tree pruning around your home.
Pros
- 38-cc, 1.8-HP 2-cycle X-Torq engine
- Centrifugal Air Injection cleaning system preserves filter life
- LowVib vibration dampening system reduces operator fatigue
- Inertia-activated chain brake and automatic chain oiler
Cons
- Engine output is limited to 1.8 horsepower
- Total weight is 16.6 pounds
Good fit if
- You need a 16-inch 2-cycle saw for home pruning and general wood cutting.
- You want vibration reduction and an air purge system for easier starts.
Skip if
- You require more than 1.8 HP for felling large timber.
- You prefer a saw that weighs under 16 pounds.
Verdict: Husqvarna 120 Mark III 16-Inch Gas Chainsaw delivers balanced 38-cc cutting power with built-in vibration reduction for everyday pruning and wood cutting.
Baococo 62cc 22-inch Gas Chainsaw
Best for: Felling medium trees and firewood processing
- Engine Cycle
- 2-Cycle (what this guide is about)
- Bar Length
- 18+22inch
- Power Source
- Gas Powered
- Engine Displacement
- 62cc
- Motor Type
- 2-Stroke
- Tilling Width
- 22 Inch
The Baococo 62cc chainsaw features a 2-cycle engine producing 3.5 HP at 12,000 RPM. It includes both 18-inch and 22-inch guide bars for versatile cutting tasks. The unit weighs 20.2 pounds and measures 35.7 inches in length. It offers dual safety protections and a shock-absorbing handle. This model suits users needing a powerful tool for felling medium trees or processing firewood.
Pros
- 62cc 2-cycle engine delivers 3.5 HP
- Includes both 18-inch and 22-inch guide bars
- High-strength steel bar and low-kickback chain
- Built-in shock absorber reduces vibration
- Anti-accidental-start lock and fast-acting brake
Cons
- Heavier at 20.2 pounds than many 2-cycle models
- No mention of tool-less chain tensioning
- No mention of auto-oiling system details
Good fit if
- You need a 22-inch bar for felling medium trees
- You want a 2-cycle engine with high RPM
- You prefer dual safety locks for peace of mind
Skip if
- You require a lightweight top-handle design under 15 pounds
- You only need an 18-inch bar for light trimming
- You prefer electric or battery-powered tools
Verdict: Baococo 62cc 22-inch Gas Chainsaw fits users who need serious cutting power for medium-sized trees and value the flexibility of two bar sizes. It is a robust choice for firewood processing and yard cleanup.
SUPMIXTOOLS 20-Inch 62cc Gas Chainsaw
Best for: cutting firewood and felling larger trees
- Engine Cycle
- 2-Cycle (what this guide is about)
- Bar Length
- 20 Inch
- Power Source
- Gas Powered
- Engine Displacement
- 62cc
- Motor Type
- 2-Cycle
- Dimensions
- 32.1 × 10 × 10.4 inches
The SUPMIXTOOLS 20-Inch 62cc 2-Cycle Gas Chainsaw pairs a 62cc full-crank two-stroke engine with a 20-inch guide bar. Built for cutting logs, felling trees, and processing firewood, the complete unit weighs 14 pounds and measures 32.1 inches in overall length. Built-in safety features include a low-kickback chain, quick-stop chain brake, and safety switch. It suits you if you need a high-displacement engine for demanding yard cutting.
Pros
- 62cc 2-cycle full-crank engine provides power for large logs
- 20-inch guide bar with a low-kickback chain
- Equipped with a quick-stop chain brake and safety switch
- Choice of orange or blue color options
Cons
- 14-pound weight adds physical strain during extended overhead work
- 32.1-inch overall length requires significant storage space
Good fit if
- You need a 20-inch guide bar for slicing through larger logs and branches.
- You want a 62cc engine for firewood preparation and tree felling.
Skip if
- You want a lightweight, compact saw under 14 pounds for light pruning.
- You prefer a shorter 12-inch or 16-inch bar for close-quarters work.
Verdict: SUPMIXTOOLS 20-Inch 62cc 2-Cycle Gas Chainsaw pairs a 62cc engine with a 20-inch bar to give you the capacity needed for heavy firewood and timber tasks.
NEO-TEC 12-Inch Gas Top-Handle Chainsaw
Best for: pruning, limbing, and elevated tree work
- Engine Cycle
- 2-Cycle (what this guide is about)
- Bar Length
- 12"
- Power Source
- Gas Powered
- Engine Displacement
- 25.4cc
- Motor Type
- 2-Stroke
- Recommended Use
- Firewood, Yard, Pruning, Wood Cutting
The NEO-TEC 12-Inch Top Handle Gas Chainsaw is a compact 2-cycle tool designed for overhead and light cutting tasks. Powered by a 25.4cc 2-stroke engine delivering 1.2 HP and speeds up to 12,000 RPM, it pairs a 12-inch bar with an overall weight of 8.2 pounds. It suits you if you need a nimble saw for pruning, limbing, yard maintenance, or felling small trees.
Pros
- 25.4cc 2-cycle engine reaches up to 12,000 RPM
- Lightweight 8.2-pound profile with bar and chain attached
- Built-in metal lanyard ring for climbing setups
- Spring-assisted ignition system for smooth starting
Cons
- 12-inch bar restricts cutting capacity on thick logs
- 1.2 HP output is not intended for heavy felling
Good fit if
- You need a lightweight chainsaw for pruning, limbing, or yard maintenance.
- You work off the ground and need a compact saw with a lanyard attachment.
Skip if
- You regularly cut thick logs that require a guide bar longer than 12 inches.
- You require higher displacement and horsepower for heavy-duty logging.
Verdict: NEO-TEC 12-Inch Top Handle Gas Chainsaw pairs a lightweight 25.4cc engine with a 12-inch guide bar, making it a practical choice for limbing and pruning.
Husqvarna 120 Mark III 14-Inch Gas Chainsaw
Best for: light residential pruning and yard wood cutting
- Engine Cycle
- 2-Cycle (what this guide is about)
- Bar Length
- 14 Inch
- Power Source
- Gas
- Engine Displacement
- 38-cc
- Motor Type
- 2-Cycle
- Features
- Automatic Oiler
The Husqvarna 120 Mark III is a compact gas saw powered by a 38-cc 2-cycle X-Torq engine. It features a 14-inch guide bar with a 3/8-inch pitch and .050-inch gauge chain, alongside an automatic oiler and vibration dampeners. At 10.7 pounds, it gives you a maneuverable setup designed specifically for pruning branches and general yard wood cutting without the bulk of larger logging saws.
Pros
- 38-cc 2-cycle X-Torq engine provides efficient combustion
- LowVib dampeners isolate vibration between the engine and chassis
- Automatic oiler keeps the chain lubricated during operation
- Auto-reset stop switch helps prevent accidental engine flooding
Cons
- 14-inch bar provides less reach than 18- or 20-inch models
- 38-cc displacement produces less cutting torque than larger 50-cc saws
Good fit if
- You need a compact 14-inch bar for yard pruning and branch clearing.
- You want built-in vibration dampening to make extended cutting more comfortable.
- You prefer an automatic oiler to manage bar lubrication.
Skip if
- You need to cut wide tree trunks requiring an 18-inch or 20-inch bar.
- You need a high-displacement 50-cc or 60-cc engine for heavy logging.
Verdict: Husqvarna 120 Mark III 14-Inch 38cc Chainsaw delivers manageable 2-cycle cutting power with built-in vibration dampening for routine yard maintenance. Its 14-inch bar and 38-cc displacement make it a dependable choice for residential pruning and light wood cutting.
Husqvarna 435 16-Inch Gas Chainsaw
Best for: lightweight trimming and general wood cutting
- Engine Cycle
- 2-Cycle (what this guide is about)
- Bar Length
- 16 Inch
- Power Source
- Gas
- Engine Displacement
- 40-cc
- Motor Type
- 2-Cycle
- Recommended Use
- Tree Trimming, Wood Cutting
The Husqvarna 435 is a gas-powered 2-cycle chainsaw equipped with a 40-cc, 2.2-HP X-Torq engine and a 16-inch bar. Weighing 9.78 pounds, it features Smart Start technology, LowVib dampeners, and an Air Injection centrifugal cleaning system. It is designed for wood cutting and tree trimming, making it a practical option if you need a mid-sized saw that supports bar lengths from 13 to 18 inches without excessive weight.
Pros
- Lightweight build at 9.78 pounds
- 40-cc, 2.2-HP 2-cycle X-Torq engine
- Smart Start system with air purge
- LowVib vibration-reducing dampeners
- Accommodates bar lengths from 13 to 18 inches
Cons
- Power output is limited to 2.2 HP
- Maximum supported bar length is 18 inches
Good fit if
- You need a saw weighing under 10 pounds for easier handling.
- You want built-in vibration reduction during tree trimming and wood cutting.
- You plan to use guide bars between 13 and 18 inches.
Skip if
- You require more than 2.2 HP for heavy-duty felling.
- You need a guide bar longer than 18 inches.
Verdict: Husqvarna 435 16-Inch 40cc Gas Chainsaw provides a balanced 40-cc 2-cycle platform with vibration dampening and a sub-10-pound chassis for routine yard maintenance.
VEVOR 18-Inch 52cc Gas Chainsaw
Best for: cutting firewood and general woodland maintenance
- Engine Cycle
- 2-Cycle (what this guide is about)
- Bar Length
- 18 Inch
- Power Source
- Gas Powered
- Engine Displacement
- 52cc
- Motor Type
- 2 Stroke
- Dimensions
- 16.1 × 9.84 × 11.2 inches
The VEVOR 18-Inch 52cc 2-Cycle Chainsaw gives you a 52cc two-stroke engine delivering 2.55 HP with a maximum speed of 12000 RPM. Its 18-inch bar handles logs up to 16.9 inches across in a single pass. Weighing 16.2 pounds, this saw operates on a 40:1 gas-oil mix and features a throttle-synced choke. It suits you if you need a mid-sized saw for cutting firewood, trimming fence lines, and general storm cleanup.
Pros
- 52cc 2-stroke engine provides 2.55 HP with a 12000 RPM maximum speed
- 18-inch guide bar handles logs up to 16.9 inches thick
- Throttle-synced choke engineered for quick starting
- Comes with a 360° reinforced starter rope and included starter assembly
Cons
- Total weight of 16.2 pounds adds heft during long cutting sessions
- Requires manual fuel mixing at a 40:1 gas-to-oil ratio
Good fit if
- You need to cut firewood or storm-felled branches up to 16.9 inches thick.
- You want an 18-inch bar backed by a 52cc two-stroke gas engine.
- You prefer safety hardware like a guard plate and accidental activation switch.
Skip if
- You want a lighter saw than 16.2 pounds for prolonged pruning.
- You regularly cut logs thicker than 16.9 inches in a single pass.
Verdict: VEVOR 18-Inch 52cc 2-Cycle Chainsaw delivers 2.55 HP and an 18-inch bar to process logs up to 16.9 inches thick. It provides dependable cutting capacity for property cleanup if you do not mind handling its 16.2-pound weight.
NEO-TEC 58cc 20-Inch Gas Chainsaw
Best for: Cutting thick trunks and preparing firewood
- Engine Cycle
- 2-Cycle (what this guide is about)
- Bar Length
- 18", 20"
- Power Source
- Gas Powered
- Engine Displacement
- 58cc
- Motor Type
- 2-Cycle
- Features
- Handheld
This 2-cycle gas chainsaw runs on a 58cc engine delivering 2.8 HP and a maximum speed of 7,500 RPM. Designed for logging and cutting firewood, it accommodates 18-inch and 20-inch guide bars. It features a tool-free side chain tensioner, a 550 ml fuel tank using a 25:1 fuel mix, and an anti-vibration system. It suits you if you need a mid-displacement saw for preparing large firewood and felling medium-sized trunks.
Pros
- 58cc 2-cycle engine produces 2.8 HP with a top speed of 7,500 RPM
- Supports 18-inch and 20-inch guide bars
- Tool-free side-mounted chain tensioner
- Includes a quick-stop chain brake and built-in anti-vibration system
Cons
- Total weight is 21 pounds
- Not CARB certified and cannot ship to California
- Requires a 25:1 fuel-to-oil mix ratio rather than 50:1
Good fit if
- You need a 58cc engine capable of handling up to 20-inch guide bars
- You want tool-free adjustments for quick chain tensioning
- You process firewood or cut medium to large tree trunks
Skip if
- You live in California or need a CARB-compliant tool
- You prefer a lighter chainsaw under 20 pounds
- You already run standard 40:1 or 50:1 pre-mixed fuel across your other tools
Verdict: NEO-TEC 58cc 20-Inch 2-Cycle Gas Chainsaw delivers 2.8 HP for logging and heavy firewood chores with bar options up to 20 inches. Just verify your regional shipping availability and prepare to mix fuel at 25:1.
KAKEI 62cc 18-Inch Gas Chainsaw
Best for: mid-size firewood cutting and property maintenance
- Engine Cycle
- 2-Cycle (what this guide is about)
- Bar Length
- 18-inch
- Power Source
- Gas
- Engine Displacement
- 61.5cc
- Motor Type
- 2-stroke
- Chain Speed
- 21 m/s
The KAKEI 61.5cc 18-Inch Gas Chainsaw delivers 2.75 horsepower from an air-cooled 2-stroke engine reaching speeds up to 10,300 rpm. Its 18-inch bar pairs with a .325-inch pitch chain running at up to 21 meters per second. Weighing 12.3 pounds, this saw gives you the cutting capacity for firewood processing, storm cleanup, and general ranch upkeep without requiring larger, heavier commercial equipment.
Pros
- 61.5cc 2-stroke engine produces 2.75 hp at 8,500 rpm
- 18-inch bar with chain speed up to 21 m/s
- Includes maintenance tools, chain file, and 40:1 mixing bottle
- Total configuration weight is 12.3 pounds (5.6 kg)
Cons
- Requires manual 40:1 fuel and 2-cycle oil mixing
- Does not include gasoline, 2-cycle oil, or bar-and-chain oil
Good fit if
- You need an 18-inch bar for processing firewood, storm cleanup, or ranch upkeep.
- You want an included toolkit, file, and mixing bottle for routine chain and fuel prep.
Skip if
- You want battery or plug-in power to avoid mixing gas and 2-cycle oil.
- You need a package that includes initial bar-and-chain oil and 2-cycle oil.
Verdict: KAKEI 61.5cc 18-Inch Gas Chainsaw combines a 61.5cc 2-stroke engine with an 18-inch bar for dependable firewood cutting and storm cleanup. It provides a fast 21 m/s chain speed alongside a full set of maintenance tools.
Husqvarna 445 18-Inch 50cc Chainsaw
Best for: Mid-duty wood cutting and tree trimming
- Engine Cycle
- 2-Cycle (what this guide is about)
- Bar Length
- 18 Inch
- Power Source
- Gas
- Engine Displacement
- 50-cc
- Motor Type
- 2-Cycle
- Features
- Automatic Oiler
You get a mid-size gas saw driven by a 50-cc, 2.8-HP 2-cycle X-Torq engine paired with an 18-inch bar. Weighing 11.2 pounds, it features an automatic oiler, LowVib vibration dampeners, and a centrifugal air cleaning system to clear out dust. It suits general wood cutting and tree trimming when you want solid cutting reach without managing excessive machine weight.
Pros
- 50-cc, 2.8-HP 2-cycle X-Torq engine
- Accepts guide bar lengths from 13 inches to 20 inches
- Centrifugal Air Injection system clears debris before the filter
- Built-in LowVib dampeners reduce handle vibration
Cons
- Heavier than smaller branch-trimming saws at 11.2 pounds
- Fixed 18-inch bar out of the box requires purchasing other lengths separately
Good fit if
- You need an 18-inch cutting setup for general tree trimming and firewood cutting
- You want an engine with reduced emissions and combined choke and stop controls
- You prefer an ergonomic design with a 7-degree offset front handle
Skip if
- You need a small, ultra-light top-handle saw for tight pruning
- You require an engine displacement larger than 50 cc for felling big timber
Verdict: Husqvarna 445 18-Inch 50cc Chainsaw delivers balanced cutting performance with vibration reduction and clean engine operation. It is a dependable mid-range choice for everyday property maintenance and wood cutting.
JPNTECH 12-Inch 25.4cc Top Handle Chainsaw
Best for: lightweight pruning and small woodcutting jobs
- Engine Cycle
- 2-Cycle (what this guide is about)
- Bar Length
- 12"
- Power Source
- Gas Powered
- Engine Displacement
- 25.4CC
- Motor Type
- 2-Cycle
- Features
- Handheld
The JPNTECH 12-Inch 25.4cc Top Handle Chainsaw is a compact 2-cycle gas saw built for maneuverability. Weighing 8.6 pounds, it pairs a 12-inch bar with a 25.4cc engine producing 1.2 horsepower and up to 11,000 RPM. Its top-handle configuration and spring-assisted starting system make it suitable if you need a lightweight tool for pruning, limbing, and light woodcutting without managing the bulk of standard ground saws.
Pros
- Weighs 8.6 pounds for manageable handling
- Top-handle design with spring-assisted pull cord
- 25.4cc 2-cycle engine reaches up to 11,000 RPM
- Uses a standard 3/8LP pitch, 0.050-inch gauge 45DL chain
Cons
- 1.2 HP output provides limited power compared to larger saws
- 12-inch bar limits maximum log cutting diameter
Good fit if
- You need a lightweight 8.6-pound gas saw for tight-space trimming
- You want a compact 12-inch guide bar for small logs and woodworking
- You prefer a top-handle configuration with an assisted starting pull cord
Skip if
- You need to cut large-diameter trunks requiring an 18-inch or 20-inch bar
- You require more power than the 1.2 HP delivered by this 25.4cc engine
Verdict: JPNTECH 12-Inch 25.4cc Top Handle Chainsaw delivers an agile 8.6-pound build and high-RPM performance for light cutting tasks. It works well when you prioritize low weight and compact handling over raw engine displacement.
GTHAN 20-Inch 62cc Gas Chainsaw
Best for: large-diameter log cutting and farm property cleanup
- Engine Cycle
- 2-Cycle (what this guide is about)
- Bar Length
- 20"
- Power Source
- Gas Powered
- Engine Displacement
- 62cc
- Motor Type
- 2-Cycle
- Dimensions
- 35.4 × 10 × 10.8 inches
This GTHAN gas chainsaw pairs a 62cc 2-cycle engine with a 20-inch guide bar. Delivering up to 4.2 HP, it offers ample power for bucking firewood, felling small trees, and clearing thick branches on larger properties. At 14 pounds, it gives you a full-sized cutting reach without excessive bulk, making it a strong match if you need dependable power for routine farm, yard, and garden maintenance.
Pros
- 62cc 2-cycle engine produces up to 4.2 HP
- 20-inch guide bar handles larger diameter logs
- Weighs 14 pounds for manageable handling
- Easy-start design for straightforward operation
Cons
- At 35.4 inches long, it requires ample storage space
- Too large and heavy for single-handed or high-canopy pruning
- Requires manual 2-cycle gas and oil mixing
Good fit if
- You need a 20-inch bar to cut thick firewood and large logs
- You want a high-output 4.2 HP engine for property maintenance
- You prefer a full-sized chainsaw that remains near 14 pounds
Skip if
- You need a compact, top-handle saw for light tree pruning
- You want an electric or battery-powered tool without fuel mixing
Verdict: GTHAN 20-Inch 62cc 2-Cycle Gas Chainsaw delivers strong 4.2 HP cutting performance paired with a generous 20-inch bar for demanding property cleanup.
Husqvarna 440 18-Inch Gas Chainsaw
Best for: medium tree trimming with low vibration
- Engine Cycle
- 2-Cycle (what this guide is about)
- Bar Length
- 18 Inch
- Power Source
- Gas
- Engine Displacement
- 40-cc
- Motor Type
- 2-Cycle
- Recommended Use
- Tree Trimming, Wood Cutting
The Husqvarna 440 is a 40-cc, 2.4-HP gas chainsaw with an 18-inch bar. It uses X-Torq technology to cut emissions by up to 60% and boost fuel efficiency by 20%. Smart Start helps you begin the engine with less effort. LowVib dampeners reduce handling vibration. Air Injection keeps the filter clean. This lightweight 9.78-pound saw suits tree trimming and general wood cutting tasks.
Pros
- 40-cc 2.4-HP X-Torq 2-cycle engine
- 18-inch guide bar for versatile cutting
- Smart Start mechanism for easier ignition
- LowVib technology reduces operator fatigue
- Air Injection protects the air filter
Cons
- Lower 2.4-HP output compared to 2.55-HP and 2.75-HP competitors
- Heavier than 12-inch top handle models
- Requires 40:1 fuel mix preparation
Good fit if
- You need a standard 18-inch bar for medium trees
- You want reduced vibration for longer use
- You prefer easy starting with Smart Start
Skip if
- You require more than 2.4-HP power
- You prefer a lighter top-handle design
- You want a larger 20-inch cutting capacity
Verdict: Husqvarna 440 40-cc 18-Inch Gas Chainsaw fits homeowners needing reliable 18-inch cutting with efficient fuel use and low vibration handling.
Snoonwee 58cc 2-Cycle Chainsaw with 18 and 20-Inch Bars
Best for: farm chores needing multiple bar lengths
- Engine Cycle
- 2-Cycle (what this guide is about)
- Bar Length
- 20 and 18 Inch
- Power Source
- Gas Powered
- Engine Displacement
- 58cc
- Motor Type
- 2-Stroke
- Recommended Use
- Wood Cutting, Farm
View on Amazon: Snoonwee 58cc 2-Cycle Chainsaw with 18 and 20-Inch Bars
The Snoonwee gas chainsaw features a 58cc, 3.6 HP 2-cycle engine and comes equipped with interchangeable 18-inch and 20-inch guide bars. Designed for wood cutting and farm maintenance, it lets you switch between bar lengths tool-free to handle both felling and limbing tasks. At 14.5 pounds, it incorporates an automatic oiler, dual-spring anti-vibration handles, and an inertia-activated chain brake designed to engage in 0.1 seconds.
Pros
- Includes both 18-inch and 20-inch guide bars with tool-free swapping
- 58cc 2-stroke engine produces 3.6 HP
- Dual-spring anti-vibration handles reduce operating fatigue
- Inertia-activated chain brake stops in 0.1 seconds
Cons
- Weighs 14.5 pounds before adding fuel and bar oil
- Overall tool width measures 16 inches
- Requires manual 2-cycle fuel and oil mixing
Good fit if
- You need both 18-inch and 20-inch bar options for different farm tasks.
- You want a 58cc engine with tool-free bar replacement.
- You value low-vibration spring-mounted handles for longer work sessions.
Skip if
- You need an ultra-compact saw for light branch trimming.
- You prefer an electric or battery model that avoids gas mixing.
Verdict: Snoonwee 58cc 2-Cycle Chainsaw with 18 and 20-Inch Bars delivers 3.6 HP and versatile cutting options for farm and property maintenance. Its dual-bar configuration and safety mechanisms make it a practical choice when handling varying log diameters.
Specifications side by side
| Spec | VEVOR 20-Inch 62cc Gas Chainsaw | Husqvarna 120 Mark III 16-Inch Gas Chainsaw | Baococo 62cc 22-inch Gas Chainsaw | SUPMIXTOOLS 20-Inch 62cc Gas Chainsaw | NEO-TEC 12-Inch Gas Top-Handle Chainsaw | Husqvarna 120 Mark III 14-Inch Gas Chainsaw | Husqvarna 435 16-Inch Gas Chainsaw | VEVOR 18-Inch 52cc Gas Chainsaw | NEO-TEC 58cc 20-Inch Gas Chainsaw | KAKEI 62cc 18-Inch Gas Chainsaw | Husqvarna 445 18-Inch 50cc Chainsaw | JPNTECH 12-Inch 25.4cc Top Handle Chainsaw | GTHAN 20-Inch 62cc Gas Chainsaw | Husqvarna 440 18-Inch Gas Chainsaw | Snoonwee 58cc 2-Cycle Chainsaw with 18 and 20-Inch Bars |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bar Length | 20 in | 16" | 18+22inch | 20 Inch | 12" | 14 Inch | 16 Inch | 18 Inch | 18", 20" | 18-inch | 18 Inch | 12" | 20" | 18 Inch | 20 and 18 Inch |
| Power Source | Gas Powered | Gas Powered | Gas Powered | Gas Powered | Gas Powered | Gas | Gas | Gas Powered | Gas Powered | Gas | Gas | Gas Powered | Gas Powered | Gas | Gas Powered |
| Engine Displacement | 62cc | 38cc | 62cc | 62cc | 25.4cc | 38-cc | 40-cc | 52cc | 58cc | 61.5cc | 50-cc | 25.4CC | 62cc | 40-cc | 58cc |
| Motor Type | 2 Stroke | 2-Cycle | 2-Stroke | 2-Cycle | 2-Stroke | 2-Cycle | 2-Cycle | 2 Stroke | 2-Cycle | 2-stroke | 2-Cycle | 2-Cycle | 2-Cycle | 2-Cycle | 2-Stroke |
| Chain Speed | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | 21 m/s | not specified | not specified | not specified | not specified | not specified |
| Features | not specified | Automatic Oiler | not specified | not specified | not specified | Automatic Oiler | not specified | not specified | Handheld | not specified | Automatic Oiler | Handheld | not specified | not specified | not specified |
| Recommended Use | Tree Trimming, Wood Cutting | Pruning, Wood Cutting | not specified | not specified | Firewood, Yard, Pruning, Wood Cutting | Pruning, Wood Cutting | Tree Trimming, Wood Cutting | not specified | Firewood, Logging | not specified | Tree Trimming, Wood Cutting | not specified | not specified | Tree Trimming, Wood Cutting | Wood Cutting, Farm |
| Tilling Width | not specified | not specified | 22 Inch | not specified | not specified | 14 Inch | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Engine Cycle | 2-Cycle | 2-Cycle | 2-Cycle | 2-Cycle | 2-Cycle | 2-Cycle | 2-Cycle | 2-Cycle | 2-Cycle | 2-Cycle | 2-Cycle | 2-Cycle | 2-Cycle | 2-Cycle | 2-Cycle |
| Dimensions | 16.1 × 9.84 × 11.2 inches | 35.3 × 9.1 × 10.9 inches | 35.7 × 10.9 × 10.9 inches | 32.1 × 10 × 10.4 inches | 20 × 9.8 × 8.2 inches | 28 × 9.25 × 10.7 inches | 15 × 8 × 11 inches | 16.1 × 9.84 × 11.2 inches | 20 × 10 × 12 inches | 30 × 14 × 15 inches | 16 × 8.9 × 11.5 inches | 23 × 9.8 × 9.8 inches | 35.4 × 10 × 10.8 inches | 15.2 × 8.6 × 11.1 inches | 20 × 16 × 10 inches |
| Weight | 16.1 pounds | 16.6 pounds | 20.2 pounds | 14 pounds | 8.2 pounds | 10.7 pounds | 9.78 pounds | 16.2 pounds | 21 pounds | 12.3 pounds | 11.2 pounds | 8.6 pounds | 14 pounds | 9.78 pounds | 14.5 pounds |
| Size | 62CC-20inch | 120 16" New | 18+22inch | 32.14"L x 10"W x 10.43"H | 12 Inch | 120 14"-New | 16 inch - 435 Chainsaw | 52CC-18 inch | not specified | 62CC Gas Chainsaw 18 inch Bar | 445 | 23"L x 9.8"W x 9.8"H | 20 inches | 440 Gas Chainsaw | not specified |
| Color | Orange + Black | not specified | Red | Orange | Ncs2500 With 12'' Bar/Chain | not specified | Orange | Orange & Black | Light Orange | not specified | not specified | Orange | Orange | Orange | Black |
| Model | CN-62G | 970860116 | 25068-18-22-1 | 6250 | NCS2500 | 970739614 | 970612116 | CN-52G | 1D-NCS5800-LTT-3 | K-CS6150V-18 | 970613018 | J-2500 | 6010ZP | 970612318 | Snoonwee |
If you also manage camp cookware, you can evaluate the best 2-Piece skillets by their published material gauges.
How to choose the right one
-
Match bar length to log size
Your bar length determines the maximum diameter of wood you can cut in a single pass. A 12-inch bar, like the one on the NEO-TEC model, suits light pruning and small branches. For larger firewood or medium trees, you need an 18-inch or 20-inch bar. The Baococo 62cc model offers a 22-inch bar option for felling larger trees. Always ensure the bar is long enough for your typical cuts, but not so long that it becomes unwieldy for your specific tasks.
-
Select engine displacement for power
Engine displacement, measured in cubic centimeters (cc), indicates the engine's size and potential power. Higher displacement generally means more torque for cutting through dense wood. Models like the VEVOR 62cc and GTHAN 62cc offer robust performance for heavy-duty work. If you only need to trim small branches, a smaller 25.4cc engine, such as the JPNTECH or NEO-TEC, provides sufficient power with less weight. Choose a displacement that matches the density and size of the wood you cut most often.
-
Consider weight for overhead work
Weight significantly impacts comfort, especially when working overhead or for extended periods. Top-handle chainsaws are generally lighter and more compact. The NEO-TEC 12-Inch model weighs just 8.2 pounds, making it easy to maneuver in trees. The Husqvarna 435 is another lightweight option at 9.78 pounds. Heavier models, like the Baococo at 20.2 pounds, require more strength and stability. If you plan to do a lot of limbing or pruning, prioritize a lighter unit to reduce fatigue.
-
Check for automatic oilers
An automatic oiler ensures the chain receives consistent lubrication during operation, which extends the life of the chain and bar. Several Husqvarna models, including the 120 Mark III and 445, feature this system. This feature reduces the need for manual intervention and helps prevent chain dryness and overheating. If you are cutting frequently, an automatic oiler is a practical feature that maintains performance. Verify this specification in the product attributes to ensure your chainsaw includes this maintenance aid.
-
Evaluate horsepower for cutting speed
Horsepower (HP) measures the engine's output and affects cutting speed under load. Higher HP allows the chain to maintain speed when cutting thick or hard wood. The GTHAN 62cc model delivers 4.2 HP, the highest in this group, while the VEVOR 52cc offers 2.55 HP. Match the HP to your cutting volume. For occasional yard work, lower HP may suffice. For heavy firewood processing or logging, higher HP ensures faster cuts and less strain on the engine during demanding tasks.
Frequently asked questions
Which 2-Cycle chainsaw is best for felling medium trees?
The Baococo 62cc 22-inch Gas Chainsaw is designed for felling medium trees and firewood processing. It features a 62cc engine and offers flexibility with two bar sizes, including an 18-inch and a 22-inch option. Weighing 20.2 pounds, it provides the robust power needed for serious yard cleanup and timber tasks.
What is the lightest 2-Cycle chainsaw in this group?
The NEO-TEC 12-Inch Gas Top-Handle Chainsaw is the lightest option at 8.2 pounds. It pairs a lightweight 25.4cc engine with a 12-inch guide bar. This compact build makes it a practical choice for limbing, pruning, and elevated tree work where maneuverability and low weight are essential for safety and control.
Do any models include an automatic oiler?
Yes, several Husqvarna models feature an automatic oiler. The Husqvarna 120 Mark III 16-Inch and 14-Inch Gas Chainsaws both include this feature to maintain chain lubrication automatically. The Husqvarna 445 18-Inch model also has an automatic oiler. This system helps ensure consistent chain performance during routine yard maintenance and wood cutting tasks.
Which chainsaw has the highest horsepower output?
The GTHAN 20-Inch 62cc Gas Chainsaw delivers the highest horsepower at 4.2 HP. It pairs this strong output with a generous 20-inch bar for demanding property cleanup. This model is ideal for users needing significant cutting performance for large-diameter log cutting and heavy farm property maintenance tasks.
Is there a chainsaw with multiple bar size options?
The Snoonwee 58cc 2-Cycle Chainsaw comes with both 18-inch and 20-inch bars. It delivers 3.6 HP and offers versatile cutting options for farm chores. The dual-bar configuration allows you to handle varying log diameters efficiently, making it a practical choice for property maintenance where different cutting capacities are frequently needed.
Which model is best for lightweight trimming and general wood cutting?
The Husqvarna 435 16-Inch Gas Chainsaw is a balanced choice for lightweight trimming and general wood cutting. It features a 40cc 2-cycle platform with vibration dampening. Weighing only 9.78 pounds, it offers a sub-10-pound chassis that reduces fatigue, making it dependable for routine yard maintenance and everyday cutting tasks.
What is the maximum bar length available in this list?
The Baococo 62cc 22-inch Gas Chainsaw offers the maximum bar length at 22 inches. It is designed for users who need serious cutting power for medium-sized trees. This larger bar capacity allows for processing wider logs, making it a robust choice for firewood processing and extensive yard cleanup compared to smaller models.
Which chainsaw is recommended for heavy firewood and timber tasks?
The SUPMIXTOOLS 20-Inch 62cc Gas Chainsaw is recommended for cutting firewood and felling larger trees. It pairs a 62cc engine with a 20-inch bar to provide the necessary capacity for heavy timber tasks. Weighing 14 pounds, it balances power and portability, making it suitable for demanding wood processing jobs.