Best Gas Powered Chainsaws in 2026: 15 Picks Ranked by Specs
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Choosing the best gas powered chainsaws requires matching engine output and guide bar length to your cutting chores. This guide compares 15 models based strictly on the specifications published on their listings.
The VEVOR 16-Inch 40cc Gas Chainsaw takes the top spot by providing 2.15 HP of cutting power on a 16-inch bar for firewood processing and orchard care. Use this guide to decide which engine displacement, guide bar reach, and overall tool weight best fit your property maintenance needs.
Quick picks
The best fit for you
- You need a balanced tool for cutting light firewood VEVOR 16-Inch 40cc Gas Chainsaw Its 16-inch bar and 40cc 2-cycle engine handle mid-sized branches and logs.
- You need maximum reach for felling large trees Husqvarna 460 Rancher 24-Inch Gas Chainsaw A 24-inch bar and 60.3-cc engine handle large timber.
- You need a lightweight tool for elevated yard pruning NEO-TEC 12-Inch Gas Top-Handle Chainsaw Its 8.2-pound weight and 12-inch bar allow agile cutting work.
Our 15 picks
VEVOR 16-Inch 40cc Gas Chainsaw
Best for: Light to medium firewood cutting and orchard maintenance
- Power Source
- Gas Powered (what this guide is about)
- Bar Length
- 16 Inch
- Engine Displacement
- 40cc
- Motor Type
- 2 Stroke
- Horsepower
- 15 HP
- Engine Cycle
- 2-Cycle
This gas-powered chainsaw gives you a 40cc two-stroke engine delivering 2.15 HP at up to 12,000 RPM. Its 16-inch guide bar cuts logs up to 11.8 inches across in a single pass. A throttle-synced choke enables nine-second starts with a 40:1 fuel-oil mix. It suits you if you need to trim fence lines, manage orchards, or cut firewood.
Pros
- 40cc two-stroke engine delivers up to 12,000 RPM
- 16-inch guide bar cuts timber up to 11.8 inches thick
- Throttle-synced choke supports nine-second pull starts
- Protective guard plate and switch reduce accidental activation
Cons
- 40cc displacement is lower than the 50cc to 68cc engines on this list
- 11.8-inch maximum cut capacity restricts use on thick timber
- Requires manual 40:1 fuel-to-oil mixing
Good fit if
- You need to clear storm debris or process firewood under 12 inches thick.
- You want an engine operating at up to 12,000 RPM for orchard and fence line maintenance.
Skip if
- You regularly cut large logs exceeding 11.8 inches in diameter.
- You need a high-displacement saw above 50cc for heavy felling.
Verdict: VEVOR 16-Inch 40cc Gas Chainsaw gives property owners 2.15 HP of cutting power for clearing branches and bucking firewood under 12 inches.
Baococo 62cc 18 and 22-Inch Gas Chainsaw
Best for: cold-weather logging and versatile timber cutting
- Power Source
- Gas Powered (what this guide is about)
- Bar Length
- 18 & 22 Inch
- Engine Displacement
- 62cc
- Recommended Use
- Firewood, Logging
- Dimensions
- 35.4 × 10 × 10.8 inches
- Weight
- 16.6 pounds
The Baococo 62cc Gas Chainsaw provides heavy-duty power for firewood cutting and logging. It comes equipped with both 18-inch and 22-inch guide bars, giving you flexibility for different log diameters. Key features include a forged magnesium crankcase, a tool-free chain tensioning system, and a winterized carburetor with pre-heating for cold weather. At 16.6 pounds, it suits you if you need mid-to-large bar capability with easy maintenance adjustments.
Pros
- Includes both 18-inch and 22-inch guide bars
- Tool-free chain tensioning system
- Winterized carburetor with pre-heating
- Forged magnesium crankcase construction
- EPA Phase III and CARB compliant engine
Cons
- Heavier unit weight at 16.6 pounds
- Long overall footprint at 35.4 inches
Good fit if
- You need interchangeable 18-inch and 22-inch bars for firewood and logging.
- You cut wood in cold weather and need carburetor pre-heating.
- You want tool-free chain tension adjustments during work.
Skip if
- You require a lightweight saw under 15 pounds for light trimming.
- You need a compact saw for confined, overhead cutting.
Verdict: Baococo 62cc Gas Chainsaw with 18 & 22-Inch Bars delivers substantial displacement and dual-bar flexibility with practical cold-weather and maintenance features.
NEO-TEC 58cc 20-Inch Gas Chainsaw
Best for: cutting firewood and felling medium-sized trees
- Power Source
- Gas Powered (what this guide is about)
- Bar Length
- 18", 20"
- Engine Displacement
- 58cc
- Motor Type
- 2-Cycle
- Features
- Handheld
- Recommended Use
- Firewood, Logging
The NEO-TEC 58cc 20-Inch Gas Chainsaw delivers 2.8 horsepower from a 2-cycle engine reaching speeds up to 7,500 RPM. Built for firewood cutting and logging, it accommodates 18-inch and 20-inch guide bars. You get a 550 ml fuel tank, tool-free side chain tensioning, and an integrated chain brake. It suits you if you need mid-displacement cutting power for thick trunks without complicated maintenance requirements.
Pros
- 58cc 2-cycle engine produces 2.8 HP with a maximum speed of 7,500 RPM
- Tool-free side-mounted chain tensioner allows quick adjustments
- Dual-tank setup includes a 550 ml fuel capacity and 260 ml oil capacity
- Includes an integrated quick-stop chain brake and built-in anti-vibration system
Cons
- Weighs 21 pounds, making it heavier than many comparable saws
- Not CARB certified, so it cannot be sold or shipped to California
- Requires a specific 25:1 fuel-to-oil mix ratio
Good fit if
- You need a 58cc, 2.8 HP saw capable of handling 18-inch to 20-inch logs.
- You prefer tool-free chain adjustments for straightforward field maintenance.
- You live outside California and need a gas saw for firewood preparation.
Skip if
- You reside in California, where this model cannot be shipped.
- You want a lightweight saw under 20 pounds to minimize physical fatigue.
Verdict: NEO-TEC 58cc 20-Inch Gas Chainsaw provides 2.8 HP of cutting power with practical tool-free adjustments for firewood processing and logging outside California.
Husqvarna 450 Rancher 20-Inch Gas Chainsaw
Best for: Property maintenance, firewood cutting, and yard pruning
- Power Source
- Gas Powered (what this guide is about)
- Bar Length
- 20 Inch
- Engine Displacement
- 50.2-cc
- Motor Type
- 2-Cycle
- Recommended Use
- Firewood, Yard, Pruning
- Dimensions
- 16 × 8.9 × 11.5 inches
This gas-powered chainsaw pairs a 50.2-cc, 3.2-HP 2-cycle X-Torq engine with a 20-inch guide bar. At 11.3 pounds, it provides solid cutting capacity for yard cleanup, pruning, and firewood processing. Built-in LowVib technology dampens vibration through an asymmetrical handle, while the centrifugal air cleaning system filters dust before it reaches the intake. It suits homeowners needing reliable engine power with built-in anti-vibration control.
Pros
- 50.2-cc, 3.2-HP 2-cycle X-Torq engine
- Weighs 11.3 pounds for balanced handling
- Centrifugal Air Injection system extends air filter life
- LowVib technology and asymmetrical handle reduce vibration
- Compatible with bar lengths from 13 to 20 inches
Cons
- Maximum recommended bar length is limited to 20 inches
- Requires manual 2-cycle fuel and oil mixing
Good fit if
- You need a 20-inch gas chainsaw for firewood cutting, pruning, and general yard maintenance
- You want anti-vibration features and an ergonomic handle to reduce strain during extended use
- You prefer an engine equipped with a centrifugal air cleaning system to keep debris off the filter
Skip if
- You need guide bars longer than 20 inches for felling large timber
- You want a tool that avoids mixing 2-cycle fuel
Verdict: Husqvarna 450 Rancher 20-Inch Gas Chainsaw delivers a dependable balance of 50.2-cc output, 11.3-pound working weight, and vibration-dampened operation. It is an effective option for property maintenance and cutting firewood.
PROYAMA 68cc 20-Inch and 24-Inch Gas Chainsaw
Best for: Heavy-duty log cutting and large tree felling
- Power Source
- Gas Powered (what this guide is about)
- Bar Length
- 20", 24"
- Engine Displacement
- 68cc
- Motor Type
- 2-cycle
- Dimensions
- 41 × 9.4 × 11.4 inches
- Weight
- 14.5 pounds
View on Amazon: PROYAMA 68cc 20-Inch and 24-Inch Gas Chainsaw
This gas-powered chainsaw pairs a 68cc 2-cycle engine delivering 4.5 horsepower with two interchangeable guide bars measuring 20 inches and 24 inches. At 14.5 pounds, it features a magnesium alloy crankcase and chain brake alongside an integrated anti-vibration system. You get the high output needed for felling large trees, processing thick logs, and handling demanding cleanup tasks without swapping to a completely different tool.
Pros
- High-output 68cc 2-cycle engine produces 4.5 horsepower
- Includes both 20-inch and 24-inch guide bars
- Magnesium alloy chain brake and crankcase structure
- Built-in anti-vibration system to reduce operator fatigue
Cons
- Weighs 14.5 pounds without cutting equipment attached
- Longest overall length reaches 41 inches, requiring more storage space
- Larger engine displacement requires handling high-output 2-cycle fuel mixtures
Good fit if
- You need 4.5 horsepower for cutting large-diameter timber and heavy firewood
- You want the flexibility to switch between 20-inch and 24-inch guide bars
- You prefer the structural durability of a magnesium alloy crankcase
Skip if
- You want a lightweight saw under 10 pounds for simple limb trimming
- You need a compact chainsaw for tight canopy work
Verdict: PROYAMA 68cc 20-Inch and 24-Inch Gas Chainsaw delivers robust 4.5 HP cutting power and dual-bar flexibility for heavy-duty logging and bucking. It is a solid choice when your workload demands a larger engine and durable magnesium build.
Husqvarna 120 Mark III 16-Inch Gas Chainsaw
Best for: garden cleanup and routine light yard tasks
- Power Source
- Gas Powered (what this guide is about)
- Bar Length
- 16 Inch
- Engine Displacement
- 38-cc
- Recommended Use
- Garden
- Dimensions
- 29.4 × 9.25 × 10.7 inches
- Weight
- 10.7 pounds
This compact saw pairs a 38-cc, 1.8-HP X-Torq engine with a 16-inch guide bar. Weighing 10.7 pounds, it is built for manageable handling during typical yard and garden tasks. It features an air purge system, combined choke/stop control, and an inertia-activated chain brake. If you need a lighter gas-powered saw for limb trimming and general outdoor cleanup, this configuration fits the job well.
Pros
- 38-cc, 1.8-HP X-Torq engine
- 10.7-pound weight for easier handling
- Centrifugal Air Injection cleaning system
- LowVib vibration-dampening technology
- Inertia-activated chain brake for safety
Cons
- Lower 1.8-HP output compared to heavy-duty saws
- Engine displacement limited to 38-cc
- Bar length maxes out at recommended 18 inches
Good fit if
- You want a lighter 10.7-pound gas saw for garden and yard tasks
- You need a manageable 16-inch bar for light to medium cutting
- You prefer built-in vibration reduction to minimize user fatigue
Skip if
- You need a high-displacement engine for felling large mature trees
- You require a guide bar larger than 18 inches for heavy logging
Verdict: Husqvarna 120 Mark III 16-Inch Gas Chainsaw provides a balanced 38-cc engine and a 10.7-pound frame suited for routine garden cleanup and light cutting. It is an approachable option when you want gas capability without excessive bulk.
Husqvarna 460 Rancher 24-Inch Gas Chainsaw
Best for: heavy cutting requiring a large 24-inch bar
- Power Source
- Gas Powered (what this guide is about)
- Bar Length
- 24 Inch
- Engine Displacement
- 60.3-cc
- Dimensions
- 17 × 9 × 12 inches
- Weight
- 13.2 pounds
This gas-powered chainsaw pairs a 60.3-cc, 3.6-HP X-Torq engine with a large 24-inch guide bar. Built for demanding woodcutting tasks, it features Smart Start technology, a centrifugal Air Injection cleaning system, and an inertia-activated chain brake. If you need substantial cutting reach and heavy-duty output supported by anti-vibration engineering, this configuration provides the required specs for felling larger timber and processing thick firewood logs.
Pros
- 60.3-cc, 3.6-HP engine delivers high cutting power
- Comes equipped with a large 24-inch guide bar
- Centrifugal Air Injection system helps preserve air filter life
- LowVib technology and 7-degree offset handle reduce user fatigue
- Compatible with a wide range of bar lengths from 13 to 24 inches
Cons
- Base weight of 13.2 pounds before adding bar, chain, and fluids
- Large 24-inch bar can be cumbersome for light pruning jobs
Good fit if
- You need a long 24-inch bar to cut through thick tree trunks and large logs
- You want a high-displacement 60.3-cc engine engineered for sustained torque
- You prefer ergonomic vibration reduction for longer cutting sessions
Skip if
- You primarily do light yard cleanup and small branch trimming
- You want a compact, ultra-lightweight saw under 10 pounds
Verdict: Husqvarna 460 Rancher 24-Inch Gas Chainsaw delivers robust 60.3-cc power and heavy-duty cutting capability for large-diameter wood. It is a dependable choice when your projects require long bar reach and low-vibration operation.
SUPMIXTOOLS 20-Inch 62cc Gas Chainsaw
Best for: cutting firewood and felling medium trees
- Power Source
- Gas Powered (what this guide is about)
- Bar Length
- 20 Inch
- Engine Displacement
- 62cc
- Motor Type
- 2-Cycle
- Dimensions
- 32.1 × 10 × 10.4 inches
- Weight
- 14 pounds
The SUPMIXTOOLS 20-Inch 62cc Gas Chainsaw pairs a full-crank 2-cycle engine with a 20-inch guide bar for cutting larger logs, felling trees, and firewood processing. At 14 pounds, it includes safety equipment such as a quick-stop chain brake and an accidental-start safety switch. If you need a high-displacement saw for heavy wood cutting without stepping up to larger commercial equipment, this setup offers balanced dimensions for regular outdoor property maintenance.
Pros
- High-displacement 62cc full-crank 2-cycle engine
- 20-inch bar equipped with a low-kickback chain
- Dual safety design with a quick-stop chain brake and throttle lock switch
- Total tool weight of 14 pounds
Cons
- Includes only a single 20-inch bar size without smaller alternate options
- Requires preparing a standard 2-cycle gas and oil fuel mixture
- Total weight of 14 pounds can cause fatigue during extended overhead limb work
Good fit if
- You need a 20-inch guide bar and a 62cc engine for cutting logs and felling trees.
- You want built-in safety controls, including a chain brake and trigger lockout.
- You require a full-crank 2-stroke design to minimize operating vibration.
Skip if
- You want an interchangeable combo kit that comes with 16-inch or 18-inch bars.
- You prefer an ultra-lightweight saw under 10 pounds strictly for light garden pruning.
Verdict: SUPMIXTOOLS 20-Inch 62cc Gas Chainsaw delivers solid cutting capacity and dual safety mechanisms for firewood bucking and tree felling. Its 14-pound footprint provides a steady platform whenever you need a full 20-inch reach.
IVOVI 63cc Gas Chainsaw with 18 & 20-Inch Bars
Best for: versatile cutting with interchangeable bar sizes
- Power Source
- Gas Powered (what this guide is about)
- Bar Length
- 18", 20"
- Engine Displacement
- 63cc
- Motor Type
- 2-cycle
- Chain Speed
- 85 ft/s
- Dimensions
- 35.4 × 15 × 11.4 inches
View on Amazon: IVOVI 63cc Gas Chainsaw with 18 & 20-Inch Bars
The IVOVI 63cc Gas Chainsaw features a 3.7-horsepower 2-cycle engine paired with interchangeable 18-inch and 20-inch guide bars. Running at up to 8,500 RPM with an 85 feet-per-second chain speed, it provides strong cutting pace for bucking rounds and processing fallen timber. At 14 pounds, it suits property owners who want substantial cutting power alongside the flexibility of two distinct bar lengths.
Pros
- Includes both 18-inch and 20-inch guide bars
- 63cc 2-cycle engine delivers 3.7 HP and 8,500 RPM
- Fast chain speed rated at 85 ft/s
- Equipped with a 0.26 L automatic chain oiler
Cons
- Base weight of 14 pounds before fuel and bar oil
- Requires manual tools for chain tensioning
Good fit if
- You want the option to switch between 18-inch and 20-inch bars depending on wood size.
- You need a high chain speed of 85 ft/s to cut firewood and thick rounds quickly.
Skip if
- You prefer an ultra-light saw under 10 pounds for simple overhead trimming.
- You require a guide bar 24 inches or longer for felling large trees.
Verdict: IVOVI 63cc Gas Chainsaw with 18 and 20-Inch Bars delivers high-velocity cutting performance and dual-bar flexibility for serious firewood prep and acreage maintenance.
Snoonwee 58cc Gas Chainsaw with 18 and 20-Inch Bars
Best for: dual-bar versatility during routine property maintenance
- Power Source
- Gas Powered (what this guide is about)
- Bar Length
- 20-Inch & 18-Inch
- Engine Displacement
- 58cc
- Chain Speed
- 91 ft/s
- Dimensions
- 37.4 × 11.6 × 11.6 inches
- Weight
- 14.5 pounds
View on Amazon: Snoonwee 58cc Gas Chainsaw with 18 and 20-Inch Bars
The Snoonwee 58cc Gas Chainsaw delivers 3.6 horsepower with a chain speed of 91 feet per second, making it capable of handling fallen trees and routine firewood prep. It includes both 18-inch and 20-inch guide bars with matching chains, giving you the flexibility to swap setups depending on timber diameter. If you need a versatile two-in-one setup with dual-spring vibration dampening and a 550-milliliter fuel capacity, this saw fits your yard maintenance routine.
Pros
- 58cc gas engine produces 3.6 HP with a chain speed of 91 ft/s
- Includes both 18-inch and 20-inch guide bars and matching chains
- Dual-spring anti-vibration handle dampens motor shake
- Quick-stop chain brake provides immediate kickback protection
Cons
- Weighs 14.5 pounds before adding bar oil and gasoline
- Max bar size tops out at 20 inches for extra-thick trunks
Good fit if
- You want the versatility of switching between 18-inch and 20-inch bars.
- You need a 3.6 HP engine for bucking firewood and clearing storm-damaged trees.
- You prefer an easy-start recoil system combined with vibration dampening.
Skip if
- You need a 22-inch or 24-inch bar for felling massive logs.
- You prefer an ultra-compact saw weighing under 10 pounds.
Verdict: Snoonwee 58cc Gas Chainsaw with 18 and 20-Inch Bars offers 3.6 HP cutting power and dual-bar versatility for managing heavy yard cleanup. Its 91 ft/s chain speed and anti-vibration grip provide efficient performance across various timber sizes.
NEO-TEC 12-Inch Gas Top-Handle Chainsaw
Best for: light pruning, climbing, and small-branch yard maintenance
- Power Source
- Gas Powered (what this guide is about)
- Bar Length
- 12"
- Engine Displacement
- 25.4cc
- Motor Type
- 2-Stroke
- Recommended Use
- Firewood, Yard, Pruning, Wood Cutting
- Engine Cycle
- 2-Cycle
This compact gas-powered saw pairs a 12-inch guide bar with a 25.4cc 2-stroke engine delivering 1.2 HP. Weighing just over 8 pounds, it features a top-handle configuration, a built-in metal lanyard ring, and a spring-assisted ignition system. It suits you if you need a lightweight tool for tree pruning, limbing, and light firewood prep in tight spots.
Pros
- Lightweight build at approximately 8.2 pounds
- Compact 12-inch guide bar with a 44-drive-link chain
- Top handle and metal lanyard ring for climbing and pruning
- Spring-assisted ignition designed for quick starting
Cons
- Small 25.4cc engine with modest 1.2 HP output
- 12-inch bar is limited to small-diameter wood
Good fit if
- You need a small, lightweight saw for climbing or limbing
- You want a top-handle design for precise pruning control
- You only cut small-diameter branches and light firewood
Skip if
- You need to fell medium or large trees
- You require an engine larger than 25.4cc for heavy logging
Verdict: NEO-TEC 12-Inch Top Handle Gas Chainsaw gives you a lightweight, compact option designed specifically for pruning, climbing, and light yard maintenance.
Husqvarna 120 Mark III 14-Inch Gas Chainsaw
Best for: Light yard pruning and firewood cutting
- Power Source
- Gas Powered (what this guide is about)
- Bar Length
- 14 Inch
- Engine Displacement
- 38-cc
- Motor Type
- 2-Cycle
- Features
- Automatic Oiler
- Recommended Use
- Pruning, Wood Cutting
The Husqvarna 120 Mark III 14-Inch Gas Chainsaw is a compact 2-cycle saw designed for pruning and basic wood cutting. It features a 38-cc X-Torq gas engine paired with a 14-inch guide bar. At 10.7 pounds, it includes built-in LowVib dampeners to reduce handle vibration and an automatic oiler to keep the chain lubricated. It suits homeowners who need a manageable gas-powered saw for light yard maintenance rather than heavy felling.
Pros
- 38-cc 2-cycle X-Torq engine for fuel-efficient cutting
- Built-in automatic chain oiler
- LowVib vibration dampeners between engine and chassis
- Inertia-activated chain brake for operator safety
- Weighs 10.7 pounds for easier handling
Cons
- 14-inch bar length limits maximum cutting diameter
- 38-cc displacement provides less output than larger felling saws
Good fit if
- You need a lightweight 10.7-pound gas chainsaw for residential pruning and yard cleanup.
- You prefer a shorter 14-inch bar for maneuverability in tight cutting spaces.
- You want reduced handle vibration and automatic chain lubrication in a compact saw.
Skip if
- You need a guide bar longer than 14 inches for processing thick tree trunks.
- You require high engine displacement for heavy-duty logging.
Verdict: Husqvarna 120 Mark III 14-Inch Gas Chainsaw provides efficient 38-cc performance with automatic oiling and low vibration for everyday yard tasks. It serves as an accessible, lighter-weight gas tool for basic residential wood cutting.
Husqvarna 130 16-Inch Gas Chainsaw
Best for: light yard work and residential branch trimming
- Power Source
- Gas Powered (what this guide is about)
- Bar Length
- 16 Inch
- Engine Displacement
- 38-cc
- Dimensions
- 16.4 × 9 × 11.4 inches
- Weight
- 5.67 pounds
The Husqvarna 130 is a compact gas-powered chainsaw equipped with a 38-cc, 2-HP engine and a 16-inch guide bar. Weighing 5.67 pounds, it includes anti-vibration dampeners, a centrifugal air cleaning system, and a combined choke and stop control to prevent engine flooding. If you need a lightweight tool for general yard work and garden trimming with bar capacities between 14 and 16 inches, this saw matches your routine cutting tasks.
Pros
- 38-cc, 2-HP engine designed to maximize power at low RPMs
- Centrifugal air cleaning system removes debris before reaching the air filter
- LowVib dampeners isolate vibration to reduce user fatigue
- Inertia-activated chain brake limits kickback risk
- Combined choke and stop control reduces the chance of engine flooding
Cons
- Maximum recommended bar length is limited to 16 inches
- 38-cc displacement offers less power than larger logging saws on the list
Good fit if
- You need a lightweight gas tool for home and garden maintenance tasks.
- You intend to use 14-inch to 16-inch guide bars for clearing limbs.
- You want vibration dampening and simplified choke controls for easier handling.
Skip if
- You require guide bars longer than 16 inches for large-diameter timber.
- You need higher engine displacement than 38 cc for heavy firewood logging.
Verdict: Husqvarna 130 16-Inch Gas Chainsaw delivers a manageable 38-cc, 2-HP platform designed for everyday yard cleanup without excessive weight. It is a solid, easy-handling choice when your cutting needs do not exceed a 16-inch guide bar.
VEVOR 18-Inch 52cc Gas Chainsaw
Best for: Medium firewood cutting and storm cleanup
- Power Source
- Gas Powered (what this guide is about)
- Bar Length
- 18 Inch
- Engine Displacement
- 52cc
- Motor Type
- 2 Stroke
- Engine Cycle
- 2-Cycle
- Dimensions
- 16.1 × 9.84 × 11.2 inches
This gas-powered saw runs a 52cc 2-stroke engine that puts out 2.55 HP at up to 12,000 RPM. Paired with an 18-inch guide bar, it cuts logs up to 16.9 inches thick in one pass. It includes a throttle-synced choke for quick starting and weighs 16.2 pounds. It suits you if you need a mid-sized saw for cutting firewood, orchard trimming, or clearing storm-damaged trees.
Pros
- 52cc 2-stroke engine delivers 2.55 HP and 12,000 RPM maximum speed
- 18-inch bar handles logs up to 16.9 inches in diameter
- Throttle-synced choke helps reduce engine flooding during starts
- Comes with a 360-degree reinforced starter rope and guard plate
Cons
- Requires manual 40:1 fuel-to-oil mixing
- Total weight is 16.2 pounds
Good fit if
- You need to cut logs up to 16.9 inches in a single pass
- You want a 52cc gas engine for storm cleanup and firewood prep
- You prefer an 18-inch guide bar for general property maintenance
Skip if
- You want a larger 20-inch or 24-inch bar for felling larger timber
- You prefer not to mix two-cycle gas and oil
Verdict: VEVOR 18-Inch 52cc Gas Chainsaw delivers 2.55 HP of cutting power on an 18-inch bar, making it a capable tool for mid-diameter logs and regular woodlot chores.
WTHW 58cc Gas Chainsaw
Best for: Switching between 18-inch and 20-inch cutting tasks
- Power Source
- Gas Powered (what this guide is about)
- Bar Length
- 20 in & 18 in
- Engine Displacement
- 58 cc
- Motor Type
- 2-stroke
- Dimensions
- 20 × 16 × 10 inches
- Weight
- 14.5 pounds
The WTHW is a gas-powered chainsaw equipped with a 58 cc two-stroke engine and two interchangeable guide bars measuring 18 and 20 inches. At 14.5 pounds, it includes matching 0.325-pitch chains, an automatic oiler, and a dual-spring anti-vibration system. It suits you if you need flexible cutting lengths for felling and limbing without buying two separate tools.
Pros
- Includes interchangeable 18-inch and 20-inch guide bars with two matching chains
- 58 cc two-stroke engine features Quick-Start recoil and a centrifugal air filter
- Dual-spring anti-vibration system reduces engine vibration during operation
- Equipped with an automatic oiler and an inertial chain brake
Cons
- Requires using the included scrench tool rather than tool-free chain tensioning
- Displacement of 58 cc provides less output than 62 cc and 68 cc models on this list
Good fit if
- You want both 18-inch and 20-inch guide bars in one kit
- You need a 58 cc gas chainsaw with built-in vibration reduction
Skip if
- You need a larger 22-inch or 24-inch bar for felling wider trees
- You prefer tool-free chain tensioning instead of scrench adjustment
Verdict: WTHW 58cc Gas Chainsaw with 18- and 20-Inch Bars serves operators who need to swap between 18-inch limbing and 20-inch bucking setups on a single powerhead. Its 58 cc engine and dual-spring dampers provide the capacity needed for medium woodcutting tasks.
Specifications side by side
| Spec | VEVOR 16-Inch 40cc Gas Chainsaw | Baococo 62cc 18 and 22-Inch Gas Chainsaw | NEO-TEC 58cc 20-Inch Gas Chainsaw | Husqvarna 450 Rancher 20-Inch Gas Chainsaw | PROYAMA 68cc 20-Inch and 24-Inch Gas Chainsaw | Husqvarna 120 Mark III 16-Inch Gas Chainsaw | Husqvarna 460 Rancher 24-Inch Gas Chainsaw | SUPMIXTOOLS 20-Inch 62cc Gas Chainsaw | IVOVI 63cc Gas Chainsaw with 18 & 20-Inch Bars | Snoonwee 58cc Gas Chainsaw with 18 and 20-Inch Bars | NEO-TEC 12-Inch Gas Top-Handle Chainsaw | Husqvarna 120 Mark III 14-Inch Gas Chainsaw | Husqvarna 130 16-Inch Gas Chainsaw | VEVOR 18-Inch 52cc Gas Chainsaw | WTHW 58cc Gas Chainsaw |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bar Length | 16 Inch | 18 & 22 Inch | 18", 20" | 20 Inch | 20", 24" | 16 Inch | 24 Inch | 20 Inch | 18", 20" | 20-Inch & 18-Inch | 12" | 14 Inch | 16 Inch | 18 Inch | 20 in & 18 in |
| Power Source | Gas Powered | Gas | Gas Powered | Gas | Gas Powered | Gas Powered | Gas Powered | Gas Powered | Gas | Gas | Gas Powered | Gas | Gas Powered | Gas Powered | Gas |
| Engine Displacement | 40cc | 62cc | 58cc | 50.2-cc | 68cc | 38-cc | 60.3-cc | 62cc | 63cc | 58cc | 25.4cc | 38-cc | 38-cc | 52cc | 58 cc |
| Motor Type | 2 Stroke | not specified | 2-Cycle | 2-Cycle | 2-cycle | not specified | not specified | 2-Cycle | 2-cycle | not specified | 2-Stroke | 2-Cycle | not specified | 2 Stroke | 2-stroke |
| Chain Speed | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | 85 ft/s | 91 ft/s | not specified | not specified | not specified | not specified | not specified |
| Horsepower | 15 HP | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Features | not specified | not specified | Handheld | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | Automatic Oiler | not specified | not specified | not specified |
| Recommended Use | not specified | Firewood, Logging | Firewood, Logging | Firewood, Yard, Pruning | not specified | Garden | not specified | not specified | not specified | not specified | Firewood, Yard, Pruning, Wood Cutting | Pruning, Wood Cutting | not specified | not specified | not specified |
| Engine Cycle | 2-Cycle | not specified | 2-Cycle | 2-Cycle | not specified | not specified | not specified | 2-Cycle | not specified | not specified | 2-Cycle | 2-Cycle | not specified | 2-Cycle | not specified |
| Dimensions | 39 × 25 × 26.5 inches | 35.4 × 10 × 10.8 inches | 20 × 10 × 12 inches | 16 × 8.9 × 11.5 inches | 41 × 9.4 × 11.4 inches | 29.4 × 9.25 × 10.7 inches | 17 × 9 × 12 inches | 32.1 × 10 × 10.4 inches | 35.4 × 15 × 11.4 inches | 37.4 × 11.6 × 11.6 inches | 20 × 9.8 × 8.2 inches | 28 × 9.25 × 10.7 inches | 16.4 × 9 × 11.4 inches | 16.1 × 9.84 × 11.2 inches | 20 × 16 × 10 inches |
| Weight | not specified | 16.6 pounds | 21 pounds | 11.3 pounds | 14.5 pounds | 10.7 pounds | 13.2 pounds | 14 pounds | 14 pounds | 14.5 pounds | 8.2 pounds | 10.7 pounds | 5.67 pounds | 16.2 pounds | 14.5 pounds |
| Size | 40CC-16inch | 18in+22in | not specified | 450 | 68cc 20in+24in | 120 16" Old | not specified | 32.14"L x 10"W x 10.43"H | not specified | not specified | 12 Inch | 120 14"-New | 38cc 16 inch gas chainsaw with guide bar and chain | 52CC-18 inch | not specified |
| Model | CN-40G | YYJ2601RB1822 | 1D-NCS5800-LTT-3 | 970613120 | PCS68 | 970739616 | 970613934 | 6250 | IVOVI | Snoonwee | NCS2500 | 970739614 | 967108411 | CN-52G | WTHW |
| Color | not specified | Black | Light Orange | not specified | Orange & Gray | not specified | Orange | Orange | Silver | Green | Ncs2500 With 12'' Bar/Chain | not specified | Orange | Orange & Black | Blue |
If you also manage outdoor cooking equipment, you can compare burner specs across the best gas griddles.
Choosing the Right Gas Powered Chainsaw
-
Select Your Bar Length
Guide bar length determines the maximum diameter of wood you can cut in a single pass. For trimming overhead branches or clearing light brush, a compact 12-inch bar gives you maneuverability and tighter control. Saws like the NEO-TEC 12-Inch Gas Top-Handle Chainsaw suit pruning in cramped spaces. Medium firewood processing generally requires an 18-inch to 20-inch guide bar. If you cut broad fallen tree trunks, look for 24-inch bars that let you work through thick timber without having to make cuts from multiple angles.
-
Check Overall Tool Weight
Operating a heavy chainsaw quickly leads to operator fatigue, especially during multi-hour jobs. Gas saw weights vary widely across the category based on engine block materials and chassis dimensions. For example, the NEO-TEC 58cc 20-Inch Gas Chainsaw weighs 21 pounds, providing sturdy balance for ground-level bucking but demanding strong physical endurance. If you plan to carry your saw around large acreage or handle high limb cuts, compare published dry weights closely. Selecting a lighter chassis prevents arm strain while cutting through large debris piles.
-
Compare Engine Horsepower
Engine displacement gives an estimate of size, but published horsepower defines how cleanly the chain pulls under load. When bucking dense hardwoods or dense root balls, higher horsepower prevents the chain from binding and stalling inside deep cuts. The PROYAMA 68cc 20-Inch and 24-Inch Gas Chainsaw lists an output of 4.5 HP, which helps maintain high chain speed across thick timber. For light pruning or clearing soft pine branches, engines producing between 2.0 and 2.8 HP provide plenty of cutting drive without excessive fuel consumption.
-
Consider Dual-Bar Packages
Some gas chainsaws ship with two guide bars and matching chains in the box instead of a single fixed length. Choosing a dual-bar package allows you to reconfigure the saw depending on your daily workload. The Baococo 62cc 18 and 22-Inch Gas Chainsaw includes both 18-inch and 22-inch bars for versatile timber management. You can mount the shorter bar to reduce nose-heavy fatigue during general property cleanup, then swap to the longer bar whenever you encounter larger logs that demand broader reach.
-
Look for Automatic Lubrication
Chainsaw bars and chains generate intense friction and heat while spinning at full throttle. Continuous lubrication is mandatory to prevent premature chain dulling, guide bar scorch marks, and engine drag. Saws equipped with an automatic oiler, such as the Husqvarna 120 Mark III 14-Inch Gas Chainsaw, steadily deliver bar oil while the throttle engages. Checking the feature list for an automatic oiling system ensures you do not need to pump oil manually, allowing you to focus on your line of cut and safety.
Frequently asked questions
Which gas chainsaw is the lightest on this list?
The Husqvarna 130 16-Inch is the lightest model listed, weighing 5.67 pounds. For compact tree care, the top-handle NEO-TEC NCS2500 weighs 8.2 pounds with a 12-inch bar. Lower working weights reduce operator fatigue during extended cutting sessions and yard maintenance tasks.
What engine displacement is best for heavy-duty timber cutting?
Engines measuring 60cc or higher provide the required output for felling larger timber. The PROYAMA PCS68 delivers 68cc with 4.5 HP, while the Husqvarna 460 Rancher uses a 60.3-cc engine. These higher-displacement engines maintain cutting speed when driving long 20-inch and 24-inch guide bars.
What fuel configuration do these gas chainsaws require?
Models on this list specify 2-cycle engines, including units from VEVOR, NEO-TEC, and Husqvarna. Two-stroke engines require gasoline blended with 2-cycle engine oil at manufacturer ratios. This fuel mixture lubricates the internal engine components continuously during operation because 2-cycle powerheads do not have dedicated oil crankcases.
Which gas chainsaws include multiple guide bars in the package?
Several models include dual-bar packages to handle different log diameters. The Baococo 62cc includes 18-inch and 22-inch bars, while the PROYAMA 68cc provides 20-inch and 24-inch bars. The IVOVI, Snoonwee, and WTHW chainsaws each offer interchangeable 18-inch and 20-inch guide bar options.
When should you choose a top-handle gas chainsaw?
You should choose a top-handle model for elevated pruning, climbing, and small-branch yard maintenance. The NEO-TEC 12-inch chainsaw uses a top-handle configuration and weighs 8.2 pounds. Its compact 20-inch overall length provides maneuverability in tight canopy spaces where standard rear-handle chainsaws are difficult to position.
How does an automatic oiler benefit chainsaw operation?
An automatic oiler steadily delivers bar and chain lubricant while the engine runs, without requiring manual pumping. The Husqvarna 120 Mark III 14-Inch lists this feature. Continuous lubrication reduces friction between the drive links and guide bar, helping prevent premature wear and overheating during woodcutting chores.