Great Circle GreatCircleUSA Mini Wood Chipper or Great Circle GreatCircleUSA Wood Chipper? Which Great Circle Model to Buy
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are deciding between the great circle greatcircleusa mini wood chipper vs greatcircleusa wood model. Both units share a 7 HP gas engine, 3-inch cutting capacity, and 15:1 reduction ratio. They process branches and limbs for landscaping or forestry. The main difference lies in their physical footprint and feature set. One model is compact with a vertical discharge chute. The other offers a multi-function design with optional towing and vacuum kits. You need to weigh size against versatility for your specific yard work.
Key differences
| Aspect | Great Circle 7 HP 3-Inch Mini Wood Chipper | GreatCircleUSA 7HP 3-Inch 3-in-1 Wood Chipper |
|---|---|---|
| Weight | 76 pounds | not listed |
| Dimensions | 36 x 24.1 x 41.6 inches | 24.1 x 30 x 41.6 inches |
| Torque | 10.7 ft-lbs | 9.14 ft-lbs |
| Fuel Capacity | not listed | 0.7 gallons |
| Discharge Type | Vertical Extended Chute | Side Chute |
Which one should you choose?
Choose Great Circle 7 HP 3-Inch Mini Wood Chipper if
- You need a lighter unit that is easier to move by hand
- You want higher torque for tough branches
- You prefer a vertical discharge guide for precise debris placement
Choose GreatCircleUSA 7HP 3-Inch 3-in-1 Wood Chipper if
- You want a multi-function 3-in-1 design for shredding and mulching
- You plan to tow the chipper behind an ATV or tractor
- You need a known fuel capacity for planning refueling stops
Verdict: Choose the Mini Wood Chipper if you prioritize portability and higher torque in a lighter package. Select the standard Wood Chipper if you need a multi-function system with towing options and a defined fuel tank. Both models handle 3-inch wood effectively for general yard cleanup.
Great Circle Chipper Comparison
Engine Torque
Product A, the Great Circle 7 HP 3-Inch Mini Wood Chipper, lists an engine torque of 10.7 ft lbs. This higher torque figure suggests it may handle denser or slightly more resistant wood loads with less strain on the engine. Product B, the GreatCircleUSA 7HP 3-Inch 3-in-1 Wood Chipper, specifies a max torque of 9.14 ft lbs at 2500 RPM. While both units share the same 7 HP rating and 3600 RPM rotational speed, the difference in torque ratings indicates a variation in low-end power delivery. You should consider this if you plan to chip thicker, harder branches frequently.
Physical Dimensions
The two chippers have different footprints. Product A measures 36 inches in width, 24.1 inches in length, and 41.6 inches in height. Product B is narrower at 24.1 inches wide, but longer at 30 inches, sharing the same height of 41.6 inches. If you have a narrow storage space or a small trailer with limited width, Product B’s narrower profile might fit where Product A cannot. However, Product A’s shorter length could be easier to maneuver in tight garden areas. Check your storage dimensions carefully before deciding.
Weight
Product A weighs 76 pounds. Product B does not list a weight in the provided specifications. Since both units are built for outdoor garden and forestry use, the missing weight data for Product B makes a direct comparison impossible based strictly on the available facts. You will need to check the manual or manufacturer website for Product B’s weight to determine which is easier to move or load onto a truck. For now, only Product A’s weight is confirmed.
Discharge System
Product A features a vertical extended discharge chute with an adjustable guide that ranges from 90 to 145 degrees. This allows you to direct chips precisely into a pile or container. Product B mentions a side chute for 3-inch max branches but does not specify the adjustability or range of its discharge mechanism. The explicit adjustability of Product A’s chute gives you more control over where the debris lands, which is useful for keeping your work area tidy or filling specific containers without spillage.
Multi-Function Capability
Product B is marketed as a 3-in-1 unit capable of chipping, shredding, and mulching. It includes a top hopper for 1/2-inch max volume shredding and mentions an attachable leaf vacuum for mulching, though the vacuum kit is sold separately. Product A is described primarily as a chipper/shredder/mulcher but does not highlight a dedicated vacuum attachment or separate shredding hopper in its specs. If you frequently process leaves or small brush into mulch, Product B’s specialized 3-in-1 design may offer more versatility for those specific tasks.
Which Great Circle Chipper Fits You
Users needing precise debris direction control
This model features a vertical extended discharge chute with an adjustable guide. You can aim debris at angles between 90 and 145 degrees. This allows for accurate placement of chips in tight spaces or specific piles. The compact design also aids in maneuverability for detailed landscaping tasks where direction matters.
Users wanting mulching and shredding options
This unit offers a 3-in-1 function including a leaf vacuum inlet for mulching. You can chip branches up to 3 inches or shred smaller volume material up to 1/2 inch in the top hopper. Attach a vacuum kit (sold separately) to mulch leaves. This versatility handles varied garden waste types efficiently.
Users prioritizing towing and transport
This model includes a tow bar kit attachment point for connecting to ATVs, lawn mowers, or small tractors. Although the kit is sold separately, the design supports easy transportation. This feature is useful for moving the chipper across large properties or between job sites without requiring a separate trailer or heavy lifting.
The products compared
Great Circle 7 HP 3-Inch Mini Wood Chipper
Best for: small yards and light pruning tasks
- Cutting Capacity
- 3"
- Horsepower
- 7 HP
- Reduction Ratio
- 15:1
- Rotational Speed
- 3600RPMs
- Power Source
- Gas Powered
- Dimensions
- 24.1 × 36 × 41.6 inches
View on Amazon: Great Circle 7 HP 3-Inch Mini Wood Chipper Affiliate link
This Great Circle mini wood chipper uses a 7 HP gas engine to handle branches up to 3 inches in diameter. It spins at 3600 RPM with a 15:1 reduction ratio for efficient mulching. The unit weighs 76 pounds and measures 24.1 by 36 by 41.6 inches. Its compact design suits small gardens and landscaping tasks where space is limited.
Pros
- 7 HP engine produces 10.7 ft-lbs of torque
- Handles wood up to 3 inches in diameter
- Adjustable discharge chute ranges from 90 to 145 degrees
- Compact dimensions allow for easier storage
Cons
- 3-inch cutting capacity is smaller than the 3-inch max of the standard model
- Requires manual recoil starting
- Engine oil is not included
Good fit if
- You need a compact chipper for small yards
- You primarily process branches under 3 inches thick
- You want a lighter unit for easy transport
Skip if
- You frequently process wood thicker than 3 inches
- You prefer electric power sources over gas
- You need to shred palm fronds or vines
Verdict: Great Circle 7HP 3" Mini Wood Chipper is a practical option for homeowners with small branches and limited storage space. It fits users who prioritize portability and compact size over high-volume processing power.
GreatCircleUSA 7HP 3-Inch 3-in-1 Wood Chipper
Best for: moderate garden branch and brush cleanup
- Cutting Capacity
- 3"
- Horsepower
- 7HP
- Reduction Ratio
- 15:1
- Rotational Speed
- 3600RPM
- Power Source
- Gas Powered
- Features
- 3-in-1
View on Amazon: GreatCircleUSA 7HP 3-Inch 3-in-1 Wood Chipper Affiliate link
The Great Circle LCE01 is a 3-in-1 gas-powered chipper, shredder, and mulcher. It features a 7HP engine and cuts wood up to 3 inches thick. The 15:1 reduction ratio handles branches and brush efficiently. You can attach a vacuum kit for leaf mulching. This unit suits gardeners managing moderate amounts of yard waste and branches.
Pros
- 7HP gas engine provides strong cutting power
- 3-inch maximum cutting capacity for branches
- 15:1 reduction ratio for efficient shredding
- 3-in-1 design includes leaf vacuum option
Cons
- Limited to 3-inch diameter wood
- Vacuum and tow kits sold separately
- Requires manual recoil starting
Good fit if
- You need to process branches up to 3 inches thick
- You want a machine that shreds brush and mulches leaves
- You have a small to medium-sized garden
Skip if
- You need to chip wood larger than 3 inches
- You want to mulch fresh greens or vines
- You prefer electric or battery-powered tools
Verdict: Great Circle 7HP 3-Inch Gas Chipper handles standard garden branches and brush with a reliable 7HP engine. It fits users who need a versatile tool for moderate yard cleanup.
Specifications side by side
| Spec | Great Circle 7 HP 3-Inch Mini Wood Chipper | GreatCircleUSA 7HP 3-Inch 3-in-1 Wood Chipper |
|---|---|---|
| Cutting Capacity | 3" | 3" |
| Horsepower | 7 HP | 7HP |
| Reduction Ratio | 15:1 | 15:1 |
| Rotational Speed | 3600RPMs | 3600RPM |
| Power Source | Gas Powered | Gas Powered |
| Features | not stated | 3-in-1 |
| Dimensions | 24.1 × 36 × 41.6 inches | 30 × 24.1 × 41.6 inches |
| Weight | 76 pounds | not stated |
| Color | Red | Red |
| Model | GUO054 | LCE01 |
Frequently asked questions
Which Great Circle chipper is lighter and easier to move?
The Great Circle 7 HP 3-Inch Mini Wood Chipper is the lighter option. It weighs 76 pounds. The 3-in-1 model does not list a weight in its specifications. You will likely find the Mini model easier to reposition around your yard or into a garage.
Does the Great Circle 3-in-1 model include a shredder?
The product name for the second model lists it as a 3-in-1 Wood Chipper. This suggests it may handle multiple types of debris. The Mini Wood Chipper is described strictly as a chipper. Check the manual for specific shredding capabilities if you need to process leaves or thin twigs.
Which model has a larger overall footprint?
The Great Circle 7 HP 3-Inch Mini Wood Chipper has a larger footprint. It measures 36 inches in width and 24.1 inches in length. The 3-in-1 model is narrower at 24.1 inches wide but slightly longer at 30 inches. Consider your storage space before purchasing either unit.
Can I use these chippers for small yard pruning?
Yes, both models are suitable for small yards. The Mini Wood Chipper is specifically recommended for small yards and light pruning tasks. Both units handle branches up to 3 inches thick. They are practical for homeowners who need to clear limited amounts of brush regularly.
What is the difference in height between the two models?
Both Great Circle models share the same height specification. They both stand 41.6 inches tall. This consistent height may affect how easily you can load branches into the hopper. Your own height and reach will determine which feels more comfortable to operate for you.
Which chipper is better for moderate garden cleanup?
The Great Circle 7HP 3-Inch 3-in-1 Wood Chipper is best for moderate cleanup. It is designed to handle standard garden branches and brush reliably. The Mini model is better for light tasks. If you have more volume to process, the 3-in-1 version offers the versatility you need.